Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
9-50
Revision: 2012-02-29
Watson detects LAN hosts that should be bridged to the WAN according to their
MAC address or a specific DHCP option (either Vendor Class ID, Client ID or User
Class ID). Once detected, these LAN hosts are placed under the WAN-LAN bridge,
which you must add and configure for the hybrid bridging mode beforehand. To add
the WAN-LAN bridge, follow the Connection Wizard steps described in Section
9.4.10.1. In the final step, check the 'Edit the Newly Created Connection' check
box, and click 'Finish'. The 'Bridge Properties' screen appears.
Figure 9-72: Bridge Properties
To configure the WAN-LAN bridge for the hybrid bridging mode, perform the follow-
ing: