Technical information

Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
Watson SHDSL Router
Web-based Management Manual
Revision: 2012-02-29
3-3
3. Select the ‘Internet Protocol (TCP/IP)‘ component, and press the ‘Properties‘ but-
ton.
4. The ‘Internet Protocol (TCP/IP)‘ properties will be displayed.
Select the ‘Obtain an IP address automatically‘ radio button.
Select the ‘Obtain DNS server address automatically‘ radio button.
Click 'OK' to save the settings.
3.3.3 Linux
1. Login into the system as a super-user, by entering ‗su‘ at the prompt.
2. Type ‘ifconfig‘ to display the network devices and allocated IP‘s.
3. Type ‘pump -i <dev>‘, where <dev> is the network device name.
4. Type ‘ifconfig‘ again to view the new allocated IP address.
5. Make sure no firewall is active on device <dev>.
3.4 Watson Configuration
In order to configure your Watson SHDSL router you need to access Watson‘s
Web-based management.
To access the Web-based management:
1. Launch a Web-browser on a computer in the LAN.
2. Type the gateway‘s IP address. The default IP address is 192.168.1.1 .
3. Enter your username and password to log on to the WBM. The default user
name is ‘admin‘, and the default password is ‘admin‘.
Refer to Section 4 if you need more informations on how to use the web-based
management.