Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
9-42
Revision: 2012-02-29
9.4.9.2 General
To view and edit the PPPoE connection settings, click the 'WAN PPPoE' link in the
'Network Connections' screen (see Figure 9-11). The 'WAN PPPoE Properties'
screen will appear, displaying a detailed summary of the connection's parameters,
under the 'General' tab. These parameters can be edited in the rest of the screen's
tabs, as described in the following sections.
Figure 9-57: WAN PPPoE Properties
9.4.9.3 Settings
Figure 9-58: PPPoE Settings
Schedule By default, the connection will always be active. However, you can
configure scheduler rules in order to define time segments during which the con-
nection may be active. Once a scheduler rule(s) is defined, the drop-down menu
will allow you to choose between the available rules. To learn how to configure
scheduler rules, refer to Section 9.9.3.