Technical information

Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
Watson SHDSL Router
Web-based Management Manual
Revision: 2012-02-29
9-39
4. Select the 'Manual IP Address Configuration' radio button and click Next. The
'Manual IP Address Configuration' screen appears:
Figure 9-53: Manual IP Address Configuration
5. Enter the IP address, subnet mask, default gateway, and DNS server addresses
in their respective fields. These values should either be provided to you by your
ISP or configured by your system administrator.
6. Click Next. The 'Connection Summary' screen appears:
Figure 9-54: Connection Summary
7. Select the 'Edit the Newly Created Connection' check box if you wish to be rout-
ed to the WAN Ethernet Properties screen after clicking 'Finish'. This screen is
described later in this chapter.
8. Click Finish to save the settings.
The WAN Ethernet connection will be configured with the new settings. Refer to
Section 9.4.3 to learn how to view and edit the WAN Ethernet connection's settings.