Technical information

Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
Watson SHDSL Router
Web-based Management Manual
Revision: 2012-02-29
9-37
Figure 9-50: Ethernet Connection
4. Select the 'Dynamic Negotiation (DHCP)' radio button and click Next. The 'Con-
nection Summary' screen will appear.
Figure 9-51: Connection Summary
5. Select the 'Edit the Connection' check box if you wish to be routed to the WAN
Ethernet Properties screen after clicking 'Finish'.
6. Click Finish to save the settings.
The WAN Ethernet connection will be configured to obtain an IP address from a
DHCP server. Refer to Section 9.4.3 to learn how to view and edit the WAN Ether-
net connection's settings.
Note: If your WAN connection is set to DHCP when there is no DHCP server availa-
ble, and a PPPoE server is available instead, the device status will show: "Waiting for
DHCP Lease - PPPoE server found, consider configuring your WAN connection to
PPPoE". If you select this option, refer to Section 9.4.9.