Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
9-24
Revision: 2012-02-29
9.4.4 LAN Switch
The LAN Switch interface represents Watson's integrated Ethernet Switch.
9.4.4.1 General
To view and edit the LAN Switch settings, click the 'LAN Switch' link in the 'Network
Connections' screen (see Figure 9-11). The 'LAN Switch Properties' screen ap-
pears, displaying a detailed summary of the connection's parameters, under the
'General' tab. These parameters can be edited in the rest of the screen's tabs, as
described in the following sections.
Figure 9-30: LAN Switch Properties – General
9.4.4.2 Settings
This section displays the connection's general parameters. It is recommended not
to change the default values unless familiar with the networking concepts they rep-
resent. Since your gateway is configured to operate with the default values, no pa-
rameter modification is necessary.
Schedule By default, the connection will always be active. However, you can
configure scheduler rules in order to define time segments during which the con-
nection may be active. Once a scheduler rule(s) is defined, the drop-down menu
will allow you to choose between the available rules. To learn how to configure
scheduler rules, refer to Section 9.9.3.
Network Select whether the parameters you are configuring relate to a WAN,
LAN or DMZ connection, by selecting the connection type from the drop-down
menu. For more information, refer to Section 9.4.2.