Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
9-6
Revision: 2012-02-29
Figure 9-4: Date and Time Settings
2. Select the local time zone from the drop-down menu. Watson can automatically
detect daylight saving setting for selected time zones. If the daylight saving set-
tings for your time zone are not automatically detected, the following fields will
be displayed:
Enabled Select this check box to enable daylight saving time.
Start Date and time when daylight saving starts.
End Date and time when daylight saving ends.
Offset Daylight saving time offset.
3. If you want the gateway to perform an automatic time update, proceed as fol-
lows:
Select the 'Enabled' check box under the 'Automatic Time Update' section.
Select the protocol to be used to perform the time update by selecting ei-
ther the 'Time of Day' or 'Network Time Protocol' radio button.