Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
8-100
Revision: 2012-02-29
1. Click the 'New Static Connection' link. The 'DHCP Connection Settings' screen
appears:
Figure 8-125: DHCP Connection Settings
2. Enter a host name for this connection.
3. Enter the fixed IP address that you would like to have assigned to the computer.
4. Enter the MAC address of the computer's network card.
Note: A device's fixed IP address is actually assigned to the specific network card's
(NIC) MAC address installed on the LAN computer. If you replace this network card
then you must update the device's entry in the DHCP Connections list with the new
network card's MAC address.
5. Click 'OK' to save the settings.