Technical information

Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
Watson SHDSL Router
Web-based Management Manual
Revision: 2012-02-29
8-99
8. In the 'Routing Mode' combo-box, select "Route". This will change Watson's
WAN to work in routing mode, which is necessary in order for DHCP relaying to
function properly.
Figure 8-123: Configure WAN Ethernet – Routing
9. Click 'OK' to save the settings.
8.6.2.3 DHCP Connections
To view a list of computers currently recognized by the DHCP server, press the
'Connection List' button that appears at the bottom of the 'IP Address Distribution'
screen (see Figure 8-119). The 'DHCP Connections' screen appears:
Figure 8-124: DHCP Connections
To define a new connection with a fixed IP address: