Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
8-98
Revision: 2012-02-29
8.6.2.2 DHCP Relay Settings
To configure a device as a DHCP relay, perform the following steps:
1. Select the 'DHCP Relay' option in the 'IP Address Distribution' combo-box under
the Service section (see Figure 8-120). The screen will refresh.
Figure 8-121: DHCP Relay Settings for LAN Switch
2. Click the 'New IP Address' link. The 'DHCP Relay Server Address' screen ap-
pears:
Figure 8-122: DHCP Relay Server Address
3. Specify the IP address of the DHCP server.
4. Click 'OK' to save the settings.
5. Click 'OK' once more in the 'DHCP Settings' screen.
6. Click the 'Network Connections' tab in the 'System' screen. The 'Network Con-
nections' screen appears (see Figure 8-11).
7. Click the 'WAN Ethernet' link. The 'WAN Ethernet Properties' screen appears
(see Section 9.4.3).