Technical information

Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
Watson SHDSL Router
Web-based Management Manual
Revision: 2012-02-29
8-91
8.4.2.2 Advanced PPTP Server Settings
To configure advanced PPTP server settings press the 'Advanced' button on the
PPTP screen. The screen expands, offering additional settings:
Figure 8-114: Advanced PPTP Server Parameters
Maximum Idle Time to Disconnect in Seconds Specify the amount of
idle time (during which no data is sent or received) that should elapse before the
gateway disconnects a PPTP connection.
Authentication Required Select whether PPTP will use authentication.
Allowed Authentication Algorithms Select the algorithms the server may
use when authenticating its clients.
Encryption Required Select whether PPTP will use encryption.
Allowed Encryption Algorithms Select the algorithms the server may use when
encrypting data.
MPPE Encryption Mode Select the Microsoft Point-to-Point Encryption mode:
stateless or stateful.
Please note that the server settings must be in tune with the client settings, de-
scribed in Section 9.4.12.