Technical information

Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
Watson SHDSL Router
Web-based Management Manual
Revision: 2012-02-29
8-89
In the 'Watson's Local' sub-tab, click 'Upload Certificate'. The 'Load Wat-
son's Local Certificate' screen appears.
Browse for the location of the certificate, which is ~/cert_create/<Watson-
1/2>_newcert.pem, and click 'Upload'.
Figure 8-111: Load Watson's Local Certificate
To authenticate the VPN connection with the created certificates, perform the fol-
lowing:
1. Click the 'VPN IPSec' link in the 'Network Connections' screen, and then click the
'IPSec' sub-tab.
2. In the 'IPSec Automatic Phase 1' section, in the 'Peer Authentication' drop-down
menu, select "Certificate". The screen refreshes, providing additional settings.
Figure 8-112: VPN IPSec Properties
3. In the 'Certificate' drop-down menu, select Gateway A's newly added certificate.
4. In the 'Local ID' field, enter Gateway A's certificate details. You can copy these
details from the 'Certificates' screen under the 'Advanced' tab. Click the certifi-
cate and copy the details from the subject field, for example "C=CH,
CN=Watson-1".
5. In the 'Peer ID' field, enter Gateway B's certificate details, for example "C=CH,
CN=Watson-2".
6. Click 'OK' to save the settings.