Technical information

Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
Watson SHDSL Router
Web-based Management Manual
Revision: 2012-02-29
8-87
3. Use the Linux 'CA.sh' utility. Note that only the required fields are listed below.
For the rest, you may simply press Enter.
$ /usr/lib/ssl/misc/CA.sh -newca
Enter PEM pass phrase: <enter a password>
Common Name: <enter your CA name>
Enter pass phrase for ./demoCA/private/./cakey.pem: <enter a
password>
For more information about this script, run 'man CA.pl' (CA.pl and CA.sh are the
same).
4. Copy the certificates from the /demoCA directory under which they were created,
providing them with your CA name.
$ cp demoCA/cacert.pem <your CA name>_cacert.pem
$ cp demoCA/careq.pem <your CA name>_careq.pem
5. Load the new certificates to both gateways:
Browse to the 'Advanced' tab and click the 'Certificates' icon.
Select the 'CA's' sub-tab and click 'Upload Certificate'. The 'Load CA's Cer-
tificate' screen appears.
Browse for the location of the certificate, which is ~/cert_create/<your CA
name>_cacert.pem, and click 'Upload'.
Figure 8-108: Load CA's Certificate
6. Generate a certificate request from both gateways:
Browse to the 'Advanced' tab and click the 'Certificates' icon.
In the 'Watson's Local' sub-tab, click 'Create Certificate Request'. The
'Create X509 Request' screen appears.