Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
8-76
Revision: 2012-02-29
Under the 'Authentication Methods' tab, click the Edit button. The 'Edit Au-
thentication Method Properties' window appears (see Figure 8-88).
Select the 'Use this string (preshared key)' radio button, and enter a string
that will be used as the key (for example, 1234). Click the 'OK' button.
Under the 'Tunnel Setting' tab, select the 'The tunnel endpoint is specified
by this IP Address' radio button, and enter <windows_ip>.
Figure 8-91: Tunnel Setting
Under the 'Connection Type' tab, verify that 'All network connections' is se-
lected.
Click the 'Apply' button and then click the 'OK' button to save this rule.
Back on the 'Watson Connection Properties' window, note that the two new
rules have been added to the 'IP Security rules' list.
Figure 8-92: Watson Connection Properties
Click 'Close' to go back to the 'Local Security Settings' window (see Figure
8-75).