Technical information

Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
Watson SHDSL Router
Web-based Management Manual
Revision: 2012-02-29
8-75
Under the 'Tunnel Setting' tab, select the 'The tunnel endpoint is specified
by this IP Address' radio button, and enter <Watson_wan_ip>.
Figure 8-89: Tunnel Setting
Under the 'Connection Type' tab, verify that 'All network connections' is se-
lected.
Click the 'Apply' button and then click the 'OK' button to save this rule.
5. Configuring Individual Rule of Tunnel 2 (Watson to Windows XP):
Under the 'IP Filter List' tab of the 'New Rule Properties' window, select the
'Watson to Windows XP' radio button.
Figure 8-90: IP Filter List
Click the 'Filter Action' tab (see Figure 8-86).
Select the 'Require Security' radio button, and click the 'Edit' button. The
'Require Security Properties' window appears (see Figure 8-87).
Verify that the 'Negotiate security' option is enabled, and deselect the
'Accept unsecured communication, but always respond using IPSec' check
box. Select the 'Session key Perfect Forward Secrecy (PFS)' (the PFS op-
tion must be enabled on Watson), and click the OK button.