Technical information

Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
Watson SHDSL Router
Web-based Management Manual
Revision: 2012-02-29
8-67
8. Click 'Finish'. The 'Network Connections' screen displays the newly created IP-
Sec connection.
Figure 8-74: New VPN IPSec Connection
8.4.1.4.2 Configuring IPSec on the Windows Host
The following IP addresses are needed for the host configuration:
 Windows IP address – referred to as <windows_ip>.
 Watson WAN IP address – referred to as <Watson_wan_ip>.
 Watson LAN Subnet address – referred to as <Watson_lan_subnet>.
The configuration sequence:
1. Creating the IPSec Policy:
Click the Start button and select Run. Type "secpol.msc" and click 'OK'.
The 'Local Security Settings' window appears.
Figure 8-75: Local Security Settings