Specifications

Watson TDM
Operating Manual
Watson-TDM-Manual-W.doc
Version 2.0-01
vi
Revision: 2008-02-07
oxygen-laden environments, or industrial facilities. Contact your local electri-
cal authority governing building construction, maintenance, or safety for more
information regarding the installation of this product.
• Slots and openings in this product are provided for ventilation and should
never be blocked or covered, since these ensure reliable operation of this
product and protect it from overheating. This product should not be placed in
a built-in apparatus such as a rack unless the apparatus has been specifically
designed to accommodate the product, proper ventilation is provided for the
product, and the product instructions have been followed.
• This product should be placed away from radiators, heat registers, stoves, or
other pieces of equipment that produce heat. Allow sufficient air circulation
around the product and the AC adapter during use to ensure adequate cool-
ing of the device.
• Do not use this product in a wet location.
• Normal operation of this product is only possible when the external housing is
left in place.
• This product should be operated only from the type of power source indicated
on the product's electrical ratings label. If you have questions about the type
of power source to use, contact your local Schmid Distributor or local power
company.
• Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need
to disconnect power to this product, be sure to unplug the power cord from
the electrical outlet.
• Ensure that the voltage select switch, if provided on this product, is in the cor-
rect position for the type of voltage in your country (115 VAC or 230 VAC).
• Do not allow anything to rest on any of the attached cables and do not posi-
tion this product where persons will walk or trip on the cables.
• Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
• Never push a foreign object through an opening in this product.
• Unplug the product from the electrical outlet and contact your local Schmid
Distributor under the following conditions:
- The power cord, extension cord, or plug is damaged.
- Liquid has been spilled or an object has fallen into this product.
- This product has been exposed to water.
- This product has been dropped or damaged in any way.
- There are noticeable signs of overheating.
- This product does not operate normally when you follow the operating in-
structions.