Specifications

Watson TDM

Operating Manual

Watson-TDM-Manual-W.doc

Version 2.0-01

7-4

Revision: 2008-02-07

7.3 The Monitor

7.3.1 Main Menu

After connecting the Terminal/PC a welcome screen is shown with information

about the modem type, firmware version and administrative name, e.g.:

Watson TDM SHDSL

E1 Monitor V4.1 Quad (4x1p)

ZRHBI351

+------------------------+

| Main Menu |

+------------------------+

1. Performance management (PM)

2. Fault and maintenance management (FMM)

3. Configuration management (CM)

4. Security and remote management (SM)

5. Exit

N. Next sub-system

LTU_01> Select [1..5,N]:

To select the desired sub-menu, type the appropriate number.

Notes:

• The Exit command is only available on a plug-in inserted in a subrack. To

address another plug-in, type %SN

7.3.2 Menus

The monitor commands are grouped into four submenus:

• Performance Management: gives access to performance data collected in the

modem

• Fault and Maintenance Management: gives access to fault, alarm and diag-

nostic data

• Configuration management: modem configuration commands

• Security and remote management: miscellaneous commands

7.3.3 Help

In each menu you can use the command HELP or H to display a list of available

commands