Specifications

Watson-TDM-Manual-W.doc
Version 2.0-01
Watson TDM
Operating Manual
Revision: 2008-02-07 3-23
The Monitor command MP controls timeslot mapping. It takes two parameters:
MP Interface Map
Interface Map
Description
1, 2 0ABCDL
E1 timeslot mapping: set associations of E1 timeslots from
E1 interface Interface to DSL links. The Map is a string of
up to 32 characters. The first character determines the asso-
ciation for the first E1 timeslot (TS0), the subsequent charac-
ters map the following timeslots. Possible values are
0: TS unused (filled with 11111111)
A: TS associated with DSL link A
B: TS associated with DSL link B
C: TS associated with DSL link C
D: TS associated with DSL link D
L: TS looped back
If the Map contains less than 32 characters, the remaining
timeslots are set to 0 (unused, filled with 11111111)
A,B,C,D 012
DSL timeslot mapping: configures which DSL bearer chan-
nels of DSL link Interface carry the associated timeslots
of the E1 interfaces. The Map is a string of up to 32 charac-
ters. The first character controls the bearer channel on the
DSL loop, the subsequent characters are assigned to follow-
ing channels. Possible values are
0: Channel unused (filled with 11111111)
1: Channel filled with to associated timeslot of E1 interface 1
2: Channel filled with to associated timeslot of E1 interface 2
Table 3-9: Multipoint configuration command MP
MP 1 OFF and MP 2 OFF will switch off E1 interfaces 1 and 2 respectively.
MP without parameters displays the current configuration:
LTU_01> MP
Multipoint Configuration
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
TS 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3
Nr 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
1 - A A A A A A A A A A B B B B B B B B B B C C C C C C D D D D A
2 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
A - 1 1 1 - 1 1 1 1 1 1 1 1 - - - - - - - - - - - - - - - - - - -
->0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
B - 1 1 1 1 1 1 1 1 1 1 - - - - - - - - - - - - - - - - - - - - -
->0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
C - - - - - - - - 1 1 1 1 1 1 - - - - - - - - - - - - - - - - - -
->0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
D - 1 - 1 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - -
->0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Figure 3-17: Multipoint configuration screen
The columns show the timeslots (0 … 31), the rows the E1 interfaces (1 and 2)
and the DSL links (A, B, C and D).