Specifications

Watson-TDM-Manual-W.doc
Version 2.0-01
Watson TDM
Operating Manual
Revision: 2008-02-07 9-35
9.2 DSL Connector
Connector Type RJ45-8
1 8
. . . .
Front View
The connector pin assignment for plug-ins is as follows:
Pin Signal Description
1 LD.a Loop D, tip
2 LD.b Loop D, ring
3 LB.a Loop B, tip
4 LA.a Loop A, tip
5 LA.b Loop A, ring
6 LB.b Loop B, ring
7 LC.a Loop C, tip
8 LC.b Loop C, ring
The connector pin assignment for the tabletop modems is as follows:
Pin Signal Description
1 NC -
2 Shield DSL cable shield (optional)
3 LB.a Loop B, tip
4 LA.a Loop A, tip
5 LA.b Loop A, ring
6 LB.b Loop B, ring
7 Shield DSL cable shield (optional)
8 NC -
Pins 2 and 7 of the tabletop are connected to ground. They can be used to con-
nect the shield of the DSL cable or can be left open.