Installation guide

LTU/NTU SZ-DOC-W5-1.pd
f
Operating Manual
V
ersion: 1.5
Revision: 2002-09-10 50
Elapsed seconds : 180
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
LTU_01_PM>
7.3.2.6 RESETBER Command
The RESETBER command resets the error and time counters of a BER test.
LTU_01_PM> RESETBER
29:01:30 BER counters reset
LTU_01_PM>
7.3.3 Fault and Maintenance Management FMM
04:41:20 Fault and maintenance management activated
type <M> to return to MAIN, or <H> for HELP information
Type <H> and the monitor lists all available commands in the fault and maintenance sub-menu:
LTU_10_FMM> H
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DIAGNOSTIC (DIA) Activate / deactivate diagnostic display
STATUS Display local system status
ALARM Display local alarm status
ALARM T Turn alarm trace on/off
ALARM H hh:mm Display alarm history (hh:mm = [0:00..23:59])
CLEAR Clear alarm history
ACO [ON,OFF] Activate / deactivate alarm cutoff
LOOP1 [ON,OFF] Activate / deactivate local loopback
LOOP2 [ON,OFF] Activate / deactivate remote loopback
LOOPREGn [ON,OFF] Activate / deactivate regenerator loopback
STARTAL Start analog loopback
STOPAL Stop analog loopback
TRACETIME [1..20] Change trace time (1..20 seconds)
RESET Reset system
RESETCARD Perform complete HW and SW reset
M(AIN) Return to main menu
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
LTU_10_FMM>
7.3.3.1 DIAGNOSTIC Command
The DIAGNOSTIC command allows the user to monitor the signal quality, the G.826 parameter,
the attenuation, the status and the alarms of one LTU/NTU
LTU_01_FMM> Diagnostic
---------------------------------------------+--------------------
Diagnostic: SQ G.826(ES) Attn Status | Alarms
---------------------------------------------+--------------------
LTU-A: +13.5 00000001 +00.79 Sync |PID
LTU-B: +14.0 00000000 +00.86 Sync |
LTU-C: +16.5 00000001 +00.00 Sync |
LTU-D: +15.0 00000000 +00.08 Sync |
---------------------------------------------+--------------------
NTU-A: +14.5 00000001 +00.00 Sync |
NTU-B: +14.0 00000000 +00.00 Sync |
NTU-C: +11.5 00000000 +00.02 Sync |
NTU-D: +11.5 00000000 +00.00 Sync |
---------------------------------------------+--------------------
LTU_01_FMM>