Specifications

W5-Ethernet-Manual.doc
Version 2.0-01
Watson 5 Ethernet
Operating Manual
Revision: 2006-04-27 8-5
8.2.4 Q-Bridge-MIB (RFC 2674)
The Q-Bridge-MIB controls the VLAN functions of the Ethernet bridge of the Watson 5 Ethernet
plugin modem. Note that the Q-Bridge-MIB only supports single VLAN tags.
Implemented data structures:
! dot1qBase group
! dot1qVlanCurrentTable (VLAN change history with dot1qVlanTimeMark is
not supported. The object dot1qVlanFdbId is writeable and allows to define the FDB of
this VLAN.)
! dot1qVlanStaticTable
! dot1qPortVlanTable
8.2.5 Entity MIB (RFC 2737)
The Entity MIB contains data structures modeling the subrack and the plugins in the subrack.
Implemented data structures:
! entPhysicalTable
! entLogicalTable
! entLPMappingTable
! entAliasMappingTable
! entityGeneral group
8.2.6 RMON (RFC 2819)
The RMON MIB contains Ethernet statistics counters.
Implemented data structures:
! etherStatsTable. The etherStatsPkts1024to1518Octets counter also
counts packets fro9m 1519 up to 1'526 octets which is the maximum packet size supported by
the Watson 5 Ethernet plugin card.
8.2.7 IF MIB (RFC 2863)
The Interfaces MIB contains a table of all interfaces of the Watson 5 Ethernet plugin card and the
hierarchical relations between them. Note that the Ethernet interfaces of the Watson 5 Ethernet ta-
bletop modems are not visible in the ifTable.
Implemented data structures:
! ifTable
! ifStackTable