Specifications

Watson 5 Ethernet
Operating Manual
W5-Ethernet-Manual.doc
Version 2.0-01
8-4 Revision: 2006-04-27
8.2 MIB Reference
The management information of the Watson 5 Ethernet plugin is modeled according to standard-
ized MIBs. Additionally two vendor-specific MIBs are supported: the Schmid HDSL MIB to control
the Watson 5 Ethernet tabletop modems and the Schmid MIB which contains a unique hardware
identifier for the modems.
The following paragraphs document the supported MIB variables in a tree structure. For each vari-
able its name, type, OID and MAX-ACCESS are given.
8.2.1 MIB II (RFC 1213)
MIB-II contains basic information about the system and its interfaces.
Implemented data structures:
! system group
! ifTable
Note that the Ethernet interfaces of the Watson 5 Ethernet tabletop modems are not visible in the
ifTable.
8.2.2 Bridge-MIB (RFC 1493)
The Bridge MIB contains basic information about the Ethernet bridge of the Watson 5 Ethernet
plugin card.
Implemented data structures:
! dot1dBase group
! dot1dBasePortTable
! dot1dTp group
8.2.3 P-BRIDGE-MIB (RFC 2674)
The P-Bridge-MIB controls behavior of the bridge layer 2 priority features (802.1p bits)
Implemented data structures:
! dot1dExtBase group
! dot1dPortCapabilitiesTable table
! dot1dPortPriorityTable table
! dot1dTrafficClassTable table