Specifications

Watson 5 Ethernet
Operating Manual
W5-Ethernet-Manual.doc
Version 2.0-01
7-28 Revision: 2006-04-27
Passwords are always displayed as a series of asterisks (*) on the Monitor screen.
NTU_SM> SET PASSWORD
New password: ******
Confirm new password: ******
47:52:50 new password set and Monitor protection enabled
Notes: ! Password protection is disabled by default
! Firmware upgrades have no influence on the status of password protection, i.e. if a modem is
password protected it will stay password protected after a firmware download
! The password is not saved in cleartext in the modem configuration database.
7.4.4 Firmware Upgrade
DOWNLOAD DSL-Port IP-Address Package
This command downloads a new firmware package through a DSL link into a Watson 5 Ethernet
tabletop modem.
Parameters
IP-Address
IP address of the TFTP server where the new firm-
ware package is stored
Package
Filename of the new firmware package
UPDATE Command
This command loads new firmware into the Watson 5 Ethernet plugin using the TFTP protocol, cf.
3.3.
Parameters
INFO
Displays information about the currently installed firm-
ware packages on the plugin.
GET IP-Address Package
Downloads a firmware package from a TFTP server .
The TFTP server is specified by the IP-Address.
On this server a firmware package with the name
Package.SZU must be available.
COMMIT
Will activate the firmware package downloaded with
GET and reboot the plugin
REVERT
Will revert to the old firmware package (i.e. that was
active before the last GET) and reboot the plugin.
FORCE IP-Address Package
Downloads and commits a firmware package from a
TFTP server. The TFTP server is specified by the
IP-Address. On this server a firmware package
with the name Package.SZU must be available.
UPDATE FORCE does not keep a backup of the old
firmware package. The UPDATE COMMIT and
UPDATE REVERT commands will fail after
UPDATE FORCE.