Specifications

Watson 5 Ethernet
Operating Manual
W5-Ethernet-Manual.doc
Version 2.0-01
7-26 Revision: 2006-04-27
7.4 Security and Remote Management SM
7.4.1 Connection control
CONNECT DSL-Port
The CONNECT (or CON) command establishes a connection over a DSL Port to a remote unit for configura-
tion purposes. This connection uses the DSL EOC for communication.
DISCONNECT
The DISCONNECT (or DIS) command breaks the connection to the remote unit. In a modem
chain the DISCONNECT command will disconnect one modem and connect to the previous modem
in the chain, cf. 3.5.2.
To disconnect an entire chain at once you can type <ESC><ESC>
Notes: ! Connection control commands are only available on modems that are configured as DSL master
! The CONNECT and DISCONNECT commands are available from all sub-menus, but are not
displayed in the respective help screens.
7.4.2 Inventory
RCHM
The RCHM command displays the CHM code of the connected device. The CHM code includes the
hardware type identifier, information about hardware and software revisions as well as the default
delivery settings.
RFW
The RFW command displays the firmware version of the connected device.
RHM
The RHM command displays the HM code of the connected device and displays it on the terminal.
The HM code includes the serial number of the device as well as information about manufacturer
and warranty.