Specifications

W5-Ethernet-Manual.doc
Version 2.0-01
Watson 5 Ethernet
Operating Manual
Revision: 2006-04-27 7-25
The Ethernet statistics for the Watson 5 Ethernet tabletop modem are somewhat different:
NTU_FMM> ETHERNET
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Statistics of the Ethernet bridge
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Controller Frames Errors
HDLC Tx 0 0
HDLC Rx 3 3
MAC Tx 8 0
MAC Rx 8 0
Interrupt event counter
MAC Tx buffer full: 0
MAC Rx collision retransmit: 0
Elapsed time (seconds): 3140
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Attributes:
HDLC Tx
Number of Ethernet frames sent/errored frames on the DSL port
HDLC Rx
Number of Ethernet frames received/errored frames on the DSL port
MAC Tx
Number of Ethernet frames received/errored frames on the Ethernet
port
MAC Rx
Number of Ethernet frames sent/errored frames on the Ethernet port
MAC Tx buffer
full
Number of collisions on the Ethernet interface
MAC Rx colli-
sion retransmit
Number of transmit buffer overruns on the Ethernet interface
Note: Definition of Tx and Rx directions in the Watson 5 Ethernet tabletop modem:
Watson 5 Ethernet Tabletop
Ethernet
Interface
DSL
Interface
Tx
Ethernet → DSL
Rx
DSL → Ethernet
RESETETH Port
This command resets the Ethernet statistics for a particular port. On the Watson 5 Ethernet table-
top modem it is not required to specify a Port number.