Specifications

Watson 5 Ethernet
Operating Manual
W5-Ethernet-Manual.doc
Version 2.0-01
7-8 Revision: 2006-04-27
BRIDGEMODE [ Mode ]
Sets the Ethernet bridge mode. Cf. 3.2.2
Parameter:
1
Bridging is based on 802.1Q based VLAN tags
2
Transparent bridging
3
Bridging is port-based with support for inband management VLANs, cf. 3.5.5
BRIDGEMODE without parameter will display the currently active Bridgemode.
CONFIG ETHERNET Ethernet-Port
Shows the current configuration of an Ethernet port:
LTU_01_CM> CONFIG ETHERNET ETH1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Local Configuration of Bridges Ethernet Port ETH1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
AutoNegFDX : auto
FlowControl : off
Doubletagging : off
DefaultVlanId : 1
DefaultPrio : Q1
VlanList : egress tagged : -
egress untagged : 1
Loop : Off
PrioSrc : IEEETHENIP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
FLT [ ON | OFF ]
Bridge filtering mode (global for the entire bridge):
ON MAC address filtering enabled. Only broadcast packets and packets with destination ad-
dresses known to be on the Ethernet segment of a port will be forwarded to this port. Ad-
dress filtering is VLAN aware.
OFF MAC address filtering disabled. All Ethernet packets are transferred transparently to all
Ethernet interfaces.
Typing FLT without argument displays the current configuration