Specifications

Watson SHDSL Router
Operating Manual
Watson-SHDSL-Router-Manual.doc
Version 1.1-07
3-16 Revision: 2012-02-15
Notes:  Local or remote WBM, SNMP and Telnet management can be disabled if
necessary. A dedicated management VLAN can be used if necessary.
 t~íëçå=peapi=êçìíÉê=áë=éêáåÅáé~ääó=ÇÉëáÖåÉÇ=íç=ÄÉ=ã~å~ÖÉÇ=ìëáåÖ=íÜÉ=tÉÄ=
Ä~ëÉÇ=ã~å~ÖÉãÉåíK=jçëí=çÑ=íÜÉ=ã~å~ÖÉãÉåí=Å~é~ÄáäáíáÉë=~êÉ=çåäó=~ÅÅÉëëáÄäÉ=
ìëáåÖ=íÜÉ=t_j
3.7.2 Accessing the Web-based Management
The Web-based management (WBM) allows you to control various system pa-
rameters, using a user-friendly graphical interface. The Web-based management
includes a connection wizard, a graphic network map, multiple sessions, authen-
tication data kept on router, multiple user support, multilingual support, a connec-
tion diagnostics screen and more.
To access the Web-based management:
1) Launch a Web-browser on a PC in the LAN.
2) Type the router's IP address or name as provided with your router in the ad-
dress bar (Internet Explorer) or location bar (Firefox). The default IP address
is 192.168.1.1.
3) Enter your username and password to log on to the WBM. For security rea-
sons, you should change these settings after the initial login. The default user
name and password are:
• User name: admin
• Password: admin
The session will automatically time-out after a few minutes of inactivity. If you try
to operate the Web-based management after the session has expired the 'Login
screen will appear and you will have to reenter your user name and password
before proceeding. This feature helps to prevent unauthorized users from ac-
cessing the web-based management and changing Watson SHDSL router's set-
tings.
Refer to the “Watson SHDSL Router GUI Manual” [1]to know how to configure
the Watson SHDSL router using the Web-based management interface.
3.7.3 Management VLAN configuration
Watson SHDSL router supports Ethernet inband management, i.e. it is possible
to manage the router through the Ethernet user interfaces or through the Ether-
net payload carried over the DSL.
To configure Ethernet inband management and to isolate management traffic
from user traffic a dedicated management VLAN interface has to be set up.
To access the management VLAN interface from a user interface the Ethernet
ports of the Switch (ETH1.. ETH8 and Trunk) and the LAN port of the router
(LAN) have to be member of the management VLAN.
To access the management VLAN interface through the DSL Ethernet payload
the WAN port of the router has to be member of the management VLAN.