Replacement Part List

5
SHOWER SYSTEM
them with an integrated bonding flange. The
adaptor kit includes a stainless steel adaptor
ring with an over-molded rubber gasket
and a variety of perforated hole patterns
that align with most common clamping ring
shower drains. The adaptor ring replaces
the clamping ring and is attached to the drain
body using the clamping ring bolts. This
connection is made watertight via the rubber
gasket and KERDI-FIX adhesive/sealant.
The integrated bonding flange slides into the
adaptor ring, with the over-molded rubber
gasket ensuring a watertight seal. Commercial
KERDI-DRAIN adaptor kits feature a 7-1/2"
(191 mm) diameter adaptor ring and are
available with a stainless steel bonding flange
or an ABS bonding flange. The ABS bonding
flange is available in two sizes (standard or
extended length) to accommodate different
tile assembly thicknesses. The residential
KERDI-DRAIN adaptor kit features a 5-1/4"
(133 mm) diameter adaptor ring and an ABS
bonding flange. The KERDI-DRAIN adaptor
kit is particularly useful in renovations where
the clamping ring drains are difficult to replace
with the standard KERDI-DRAIN (e.g., when
they are set in concrete slabs).
The KERDI-DRAIN grate assembly consists
of a frame, which can be seamlessly adjusted
to the thickness and layout of the ceramic tile
or stone covering via the height adjustment
collar and lateral adjustment ring, and grates
or cleanout covers that are placed within
the frame. The 4" (100 mm) standard grate
assembly frame features an approximately
1/8" (3 mm) wide reveal after installation
and grate/frame combinations are available
in stainless steel with plain, chrome, or oil-
rubbed bronze finish or anodized aluminum
with brushed nickel, brushed copper, or
brushed brass finish. The 4" (100 mm) style
grate assembly frame features a minimal
reveal after installation and can be combined
with one of three brushed stainless steel grate
options: Floral (E), Curve (F), or Pure (G). The
4" (100 mm) covering support is a square
stainless steel plate with KERDI laminated on
the surface to allow for bonding of ceramic
or stone tile, which creates a virtually invisible
drainage line. The 6" (150 mm) square and
round stainless steel grate assembly frames
feature an approximately 3/16" (5 mm) wide
reveal after installation and can be combined
with stainless steel grates or cleanout covers.
Please note that grate assemblies included
with the plastic KERDI-DRAIN featuring 3"
(75 mm) outlets and the residential adaptor
kits only allow vertical and tilt adjustment (no
lateral adjustment).
8.7 Schluter
®
-KERDI-LINE is a low profile
linear floor drain specifically designed for
bonded waterproofing assemblies. KERDI-
LINE can be installed adjacent to walls or
at intermediate locations. The floor can be
sloped on a single plane to KERDI-LINE,
which enables the use of large-format tiles
and creates interesting design opportunities.
KERDI-LINE consists of a formed stainless
steel channel body and grate assembly or
covering support to which tile is applied.
The channel body features a standard 2"
(50 mm) no-hub outlet and is attached to
the pipe using an appropriate mechanical
(e.g., flexible or no-hub) coupling. The simple
connection to standard drain outlets makes
KERDI-LINE suitable for new construction
and renovation. KERDI-LINE is available with
both center and off-set outlets. The off-
set outlet is located 8" (20.3 cm) from the
edge of the channel body and provides
flexibility when obstacles (e.g., floor joists) are
encountered during installation. KERDI-LINE
includes a corresponding polystyrene foam
channel support to set the drain elevation
to the corresponding KERDI-SHOWER-L/-LS
shower trays. The perimeter of the channel
body consists of a bonding flange laminated
with a collar made of KERDI. It ensures a
simple and secure connection to the bonded
waterproofing assembly, both in the floor
area and on adjacent walls. KERDI-LINE is
available in channel lengths from 20" to 72"
(50 cm to 180 cm) in 4" (10 cm) increments.
The bonding flange extends approximately 1"
(2.5 cm) beyond the channel on all sides.
The KERDI-LINE grate assembly consists
of a stainless steel frame that can be
seamlessly adjusted to the thickness of the
ceramic tile or stone covering – 1/8" to
1" (3 mm to 25 mm) for standard grate
assemblies and 1/4" to 23/32" (6 mm to 18
mm) for style grate assemblies – and stainless
steel grates that are placed within the frame.
The standard grate assembly frame features
a 3/8" (10 mm) wide reveal after installation
and can be combined with one of two grate
options: Closed (A) or Perforated (B). Each
standard assembly is available in a brushed
or chrome finish. The Perforated (B) option
is also available with a locking mechanism
(brushed stainless steel, 3/4" – 19 mm frame
only) for applications where tamper resistance
is desired or required (e.g., healthcare and
education facilities, etc.). The style grate
assembly frame features a minimal reveal after
installation and can be combined with one of
three grate options: Floral (E), Curve (F), or
Pure (G). Each style assembly is available in a
brushed finish. The covering support is placed
flush with the top of the channel body and
can therefore accommodate any thickness
tile covering.
If KERDI-LINE is placed at shower entrance,
it is recommended that grate assembly A or
the covering support is chosen and that the
drainage openings span the maximum width
of the entrance to limit potential overflow;
secondary drainage (e.g., KERDI-DRAIN) may
be required in the drying area.
Schluter
®
-KERDI-LINE-FC is a stainless
steel cover plate for use with KERDI-LINE to
create a seamless look in applications where
multiple drains are installed end-to-end.
KERDI-LINE-FC features a brushed finish,
and is designed for use with either the solid
or perforated grates with brushed stainless
steel frame.
14.1 Schluter
®
-SHOWERPROFILE-S/-R
system profiles represent an elegant solution
for finishing the area between the floor and
the first course of wall tile in a way that
eliminates cutting wedges of tile and ensures
a consistent elevation of the first course
of wall tile in KERDI-LINE applications.
SHOWERPROFILE-S consists of a trapezoid-
perforated anchoring leg with a groove,
which accepts a tapered brushed stainless
steel profile that matches the slope of the
KERDI-SHOWER-L shower tray. The profile is
adjusted to cover the exposed wall area and
forms the visible surface. SHOWERPROFILE-R
consists of a brushed stainless steel profile
and corresponding channel. The profile is
adjusted to fit the space between the KERDI-
LINE and the wall tile and forms the visible
surface in applications where the KERDI-LINE
is placed adjacent to a wall.
Material Properties and
Areas of Application
KERDI-DRAIN drain casings are formed using
ABS, PVC, or stainless steel 304 (1.4301 = V2A).
Plastic drain casings feature a polypropylene
fleece webbing. The KERDI-DRAIN adaptor
kits feature adaptor rings made of stainless
steel 304 (1.4301 = V2A) with thermoplastic
rubber gaskets and adaptor flanges made of
stainless steel 304 (1.4301 = V2A) or ABS.
Drain grates are available in stainless steel 304
(1.4301 = V2A) and anodized aluminum. The
covering support is stainless steel 304 (1.4301
= V2A) with KERDI laminated on the surface.
The KERDI-LINE channel body is formed
using stainless steel 316 L (1.4404 =V4A)
and features a bonding flange with a KERDI
collar laminated on the surface. KERDI is
a bonded waterproof membrane made of
soft polyethylene, which is covered on both