Installation Guide

PRODUCT & ORDERING INFO 29
Schluter
®
-KERDI-KM
Schluter
®
-KERDI-KERECK-F
Inside Corner Outside Corner
Schluter
®
-KERDI-FLEX
KERDI-FLEX is a flexible polyethylene waterproofing strip used to seal movement joints over
DITRA in specialty applications where large movements are expected, i.e. over expansion joints or
construction joints.
KERDI-KERECK-F are preformed, seamless corners made of KERDI for waterproofing inside and
outside corners.
KERDI-KM prefabricated seal is cut sections of the KERDI waterproofing membrane designed to seal
protrusions through the KERDI or DITRA/DITRA-XL membranes. KERDI-KM is designed to be used
in conjunction with Schluter
®
-KERDI-FIX or equivalent sealant to seal around pipes or other similar
elements.
Schluter
®
-KERDI-FLEX
Waterproofing strip for use above movement joints
Item No. Width Length Thickness
FLEX 125/5M 5" - 125 mm 16
' 5" - 5 m 12 mil
FLEX 250/5M 10" - 250 mm 16 ' 5" - 5 m 12 mil
FLEX 125/30 5" - 125 mm 98 ' 5" - 30 m 12 mil
FLEX 250/30 10" - 250 mm 98 ' 5" - 30 m 12 mil
Note: 1 mil = 1 one-thousandth of an inch
Schluter
®
-KERDI-KERECK-F
Waterproofing for corners
Item No. Thickness Packaging
KERECK/FI 2 4 mil 2 Inside corners
KERECK/FI 10 4 mil 10 Inside corners
KERECK/FA 2 4 mil 2 Outside corners
KERECK/FA 10 4 mil 10 Outside corners
Note: 1 mil = 1 one-thousandth of an inch
Schluter
®
-KERDI-KM
Pipe seal
Item No. Dimensions Thickness Packaging
KM 5117/22
7" x 7" - 175 x 175 mm
Hole diameter, ø = 7/8" - 22 mm
4 mil 5 units
Note: 1 mil = 1 one-thousandth of an inch
Waterproofing for 135º corners
KERECK135/FI2 4 mil 2 Inside corners
KERECK135/FI10 4 mil 10 Inside corners