Installation Guide

Schluter
®
-KERDI-KM
Schluter
®
-KERDI-KERECK-F
Inside Corner Outside Corner
KERDI-KERECK-F are preformed, seamless corners made of KERDI for waterproofing inside and
outside corners.
KERDI-KM prefabricated seal is cut sections of the KERDI waterproofing membrane designed to seal
protrusions through the KERDI or DITRA/DITRA-XL membranes. KERDI-KM is designed to be used
in conjunction with Schluter
®
-KERDI-FIX or equivalent sealant to seal around pipes or other similar
elements.
Schluter
®
-KERDI-KERECK-F
Waterproofing for corners
Item No. Thickness Packaging
KERECK/FI 2 4 mil 2 Inside corners
KERECK/FI 10 4 mil 10 Inside corners
KERECK/FA 2 4 mil 2 Outside corners
KERECK/FA 10 4 mil 10 Outside corners
Note: 1 mil = 1 one-thousandth of an inch
Schluter
®
-KERDI-KM
Pipe seal
Item No. Dimensions Thickness Packaging
KM 5117/22
7" x 7" - 175 x 175 mm
Hole diameter, ø = 7/8" - 22 mm
4 mil 5 units
Note: 1 mil = 1 one-thousandth of an inch
Waterproofing for 135º corners
KERECK135/FI2 4 mil 2 Inside corners
KERECK135/FI10 4 mil 10 Inside corners
Schluter
®
-DITRA-ROLLER
Used to embed DITRA membranes in the bond coat during membrane installation. The lightweight
DITRA-ROLLER features a 14-1/2" (37 cm) wide roller and a shelf for placing 50 to 75 lbs of
weight (e.g., bag of thin-set mortar or grout, box of tiles, etc.). Between uses, it can be conveniently
disassembled for transport and storage.
Schluter
®
-DITRA-ROLLER
Used to embed DITRA in the bond coat
Item No. Width
DIRO 14-1/2" (37 cm)
Schluter
®
-TROWEL
The Schluter
®
-DITRA-TROWEL features a 11/64" x 11/64" (4.5 mm x 4.5 mm) square-notched
design, and is used to install the DITRA membrane.
The Schluter
®
-DITRA-HEAT/-DITRA-XL-TROWEL features a 1/4" x 1/4" (6 mm x 6 mm)
square-notched design, and is used to install the DITRA-HEAT and DITRA-XL membranes.
The Schluter
®
-KERDI-TROWEL features a 1/8" x 1/8" (3 mm x 3 mm) square-notched design,
and is used to install the KERDI membrane.
Schluter
®
-TROWEL
Trowels used to install DITRA, DITRA-XL, DITRA-HEAT, and KERDI membranes
Item No. Notch Size Packaging
Schluter
®
-DITRA-TROWEL
TRL-DIT 11/64" x 11/64" (4.5 mm x 4.5 mm) 1 unit
TRL-DIT6 11/64" x 11/64" (4.5 mm x 4.5 mm) 6 units
Schluter
®
-KERDI-TROWEL
TRL-KER 1/8" x 1/8" (3 mm x 3 mm) 1 unit
TRL-KER6 1/8" x 1/8" (3 mm x 3 mm) 6 units
Schluter
®
-DITRA-HEAT/-DITRA-XL-TROWEL
TRL-DHXL 1/4" x 1/4" (6 mm x 6 mm) 1 unit
TRL-DHXL6 1/4" x 1/4" (6 mm x 6 mm) 6 units
PRODUCT & ORDERING INFO 29