Product Brochure

3
is designed to protect tile edges and provide a smooth transition between tile
coverings and floor coverings at lower elevations or finished concrete. The
sloped surface eliminates trip hazards and allows easy access for wheel carts.
RENO-RAMP features an integrated joint spacer that establishes a defined
joint cavity between the tile and the profile.
Notes:
•
Sizes 9/16" (15 mm) and 3/4" (20 mm) are not accessibility compliant
•
A retrofit profile RAMP-K is available
•
This profile is bonded to existing installations
Technical Note: Accessibility requirements
regarding transitions between surfaces of
different heights:
- Up to 1/4" (6 mm) - no special requirements
- 1/4" (6 mm) to 1/2" (12.5 mm) - slope ratio, 1:2
- More than 1/2" (12.5 mm) - slope ratio, 1:12
is designed to protect tile edges and provide a smooth transition between
tile coverings and floor coverings at lower elevations or finished concrete.
The sloped surface eliminates trip hazards and the leading edge of the profile
abuts the lower surface covering. RENO-U in anodized aluminum features an
integrated joint spacer that establishes a defined joint cavity between the tile
and the profile.
Notes:
•
Sizes 3/4" (20 mm) and 11/16" (17.5 mm) are not accessibility compliant
RENO-TK
RENO-RAMP
RENO-U
is designed to protect tile edges and provide a smooth transition from tile
coverings to floor coverings at lower elevations, typically carpet. The 1/4"
(6 mm) channel beneath the sloped flange of the profile hides and protects
the cut edge of lower adjoining surface coverings. RENO-TK in anodized
aluminum sizes 5/16" (8 mm) and larger feature an integrated joint spacer that
establishes a defined joint cavity between the tile and the profile.
RAMP-K