Product Brochure

19
is a low profile linear floor drain specifically designed for bonded waterproofing
assemblies. KERDI-LINE can be installed adjacent to walls or at intermediate
locations in showers, wet rooms, and other applications that require
waterproofing and drainage. The floor can be sloped on a single plane to
KERDI-LINE, which enables the use of large-format tiles and creates interesting
design opportunities.
Notes:
•
Stainless steel channel body with center or off-center outlet and adjustable grate
assembly 1/8" to 1" (3 mm to 25 mm)
•
Channel body features a standard 2" no-hub outlet
•
Lengths from 20" to 72" (50 cm to 180 cm) in 4" (10 cm) increments
• Locking mechanism option available on the SQUARE model
KERDI-LINE
is used to convert traditional clamping ring drains to integrated bonding flange
drains when removal of the clamping ring drain is not practical. A stainless
steel adaptor ring with an overmolded rubber gasket replaces the clamping
ring and is sealed to the existing drain body using KERDI-FIX. The bonding
flange then slides into the adaptor ring and seals against the rubber gasket.
Adaptor kits are suitable for both mortar bed and KERDI-SHOWER-T/-TS/-TT
shower tray applications.
Notes:
• The adaptor ring is available in 5-1/4" (133 mm) or 7-1/2" (191 mm) diameter
• The flange for the 7-1/2" (191 mm) model features an extended outlet that
can be cut to size as needed
KERDI-DRAIN Adaptor Kit
5-1/4" (133 mm)
7-1/2" (191 mm)
KERDI-LINE grate options
SOLID
STYLE Brushed Stainless Steel
TILE
SQUARE
Brushed stainless steel
Chrome
Brushed stainless steel
Chrome
PURE CURVE FLORAL