Product Brochure

15
is a floor drain with an integrated bonding flange that provides a large contact
area for a secure connection to the KERDI waterproofing membrane at the top
of the assembly. KERDI-DRAIN is appropriate for both mortar bed and KERDI-
SHOWER-T/-TS/-TT shower tray applications. KERDI-DRAIN features a fully
adjustable grate and accommodates a wide range of tile thicknesses: 1/4" (6
mm) to 1-1/4" (32 mm). KERDI-DRAIN is listed by UPC
®, CSA, and ICC-ES
(Report No. PMG-1204).
Notes:
•
The flange is available in ABS, PVC, or stainless steel with a 2" or 3" no-hub outlet
•
The ABS and PVC flanges are also available with a 2" horizontal outlet
•
The stainless steel flange is also available with a threaded outlet
•
The grate is available in anodized aluminum or stainless steel in various finishes, as
well as a tileable version
•
Available with 6" clean-out cover
is used to convert traditional clamping ring drains to integrated bonding flange
drains when removal of the clamping ring drain is not practical. A stainless
steel adaptor ring with an overmolded rubber gasket replaces the clamping
ring and is sealed to the existing drain body using KERDI-FIX. The bonding
flange then slides into the adaptor ring and seals against the rubber gasket.
Adaptor kits are suitable for both mortar bed and KERDI-SHOWER-T/-TS/-TT
shower tray applications.
Notes:
• The 5-1/4" (133 mm) and 7-1/2" (191 mm) adaptor kit flanges are both available in ABS;
the 7-1/2" (191 mm) model has an extended outlet that can be cut to size as needed
is a low profile linear floor drain specifically designed for bonded waterproofing
assemblies. KERDI-LINE can be installed adjacent to walls or at intermediate
locations in showers, wet rooms, and other applications that require
waterproofing and drainage. The floor can be sloped on a single plane to
KERDI-LINE, which enables the use of large-format tiles and creates interesting
design opportunities.
Notes:
•
Stainless steel channel body with center or off-center outlet and adjustable grate
assembly 1/8" to 1" (3 mm to 25 mm)
•
Channel body features a standard 2" no-hub outlet
•
Lengths from 20" to 72" (50 cm to 180 cm) in 4" (10 cm) increments
• Locking mechanism option available on the Perforated model
KERDI-DRAIN
KERDI-DRAIN Adaptor Kit
KERDI-LINE
5-1/4" (133 mm)
7-1/2" (191 mm)