Commercial Product Overview Innovative installation systems for tile and stone
Floor Profiles Because ceramic and stone tiles are inherently brittle, their exposed edges can chip and crack if left unprotected. Transitions between floor surfaces and at thresholds are particularly vulnerable to damage. In addition, adjoining surfaces of different heights require a properly sloped transition to avoid trip hazards.
RENO-TK is designed to protect tile edges and provide a smooth transition from tile coverings to floor coverings at lower elevations, typically carpet. The 1/4" (6 mm) channel beneath the sloped flange of the profile hides and protects the cut edge of lower adjoining surface coverings. RENO-TK in anodized aluminum sizes 5/16" (8 mm) and larger feature an integrated joint spacer that establishes a defined joint cavity between the tile and the profile.
Wall Profiles Ceramic and stone tiles are durable, hygienic, heat resistant, and easy to maintain, representing the ideal surface covering for walls in commercial/industrial applications. Schluter®-Systems offers various finishing and edge-protection profiles for 4 © Atlas Concorde walls, increasing design flexibility and ensuring a beautiful, durable installation.
ECK-E is a stainless steel profile for outside corners of tiled walls, that offers excellent edge protection against mechanical stresses in commercial/industrial applications. The profile produces a radiused edge along the outside wall corner for a clean, decorative finish. ECK-E is installed simultaneously with the tile.
INDEC is an anodized aluminum profile for outside corners of tiled surfaces and tiled edges. The reveal of the profile forms a square recessed groove for modern decorative design and interesting contrasts. Notes: • Matching 90-degree outside corners are available DECO-SG is a decorative profile available in anodized aluminum and brushed stainless steel, which features a 1/2" (12.5 mm) or 9/16" (15 mm) wide channel that creates a shadow gap between tile courses or other wall coverings.
Stair-nosing Profiles Tiled stair edges that do not utilize appropriate trim pieces are vulnerable to chipping and breaking, and create a slip hazard, especially in exterior applications. Schluter® stair-nosing profiles protect exposed tile edges and improve safety on tiled stairways by providing slip-resistant wear surfaces and increased visibility in both residential and commercial applications.
TREP-E is designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design. The profile is made of stainless steel with an integrated non-slip tread, making it suitable for interior and exterior use in areas subjected to heavy foot-traffic, such as offices or public buildings. A retrofit version (TREP-EK) is available, and is bonded to existing installations.
Movement Joint and Cove-shaped Profiles An installed ceramic tile floor is rigid by nature and similar in physical characteristics to a large sheet of glass. This is particularly true with today’s large-format tiles and narrow joint design. Stress buildup occurs within large surfaces and at perimeters, causing cracking and loosening of the tile covering. In addition, caulking is often used to create a movement zone.
DILEX-KSN is a surface joint profile with stainless steel or aluminum anchoring legs that protect tile edges and a soft thermoplastic rubber movement zone that separates individual fields in the tile covering and forms the visible surface. The movement zone is available in different colors to match the grout and can be replaced if damaged. DILEX-KSN in stainless steel offers secure edge protection for surfaces exposed to heavy-duty commercial traffic (e.g.
DILEX-KSA is a perimeter joint profile with a stainless steel or aluminum anchoring leg and soft thermoplastic rubber movement zone that isolates the tile covering from fixed building elements (e.g., window and door frames). The movement zone is available in different colors to match the grout and can be replaced if damaged. The profile also features a self-adhesive strip that allows it to bond to the fixed building elements.
DILEX-AHKA is a cove-shaped profile for transitions between walls to be tiled, and previously finished floors. The profile features a single trapezoid-perforated anchoring leg that is secured in the mortar bond coat and a dovetailed channel, which can be bonded to floor surfaces using KERDI-FIX, epoxy resin, silicone, thin-set mortar, etc.
Curbless Showers There is increasing demand for accessible living spaces. Tiled showers typically feature curbs to retain water in the stall, which can make entry difficult for those with limited mobility, including individuals who need the assistance of wheelchairs. Curbless tiled showers rely on the slope of the floor to keep water inside the stall, thus improving accessibility.
KERDI-DRAIN is a floor drain with an integrated bonding flange that provides a large contact area for a secure connection to the KERDI waterproofing membrane at the top of the assembly. KERDI-DRAIN is appropriate for both mortar bed and KERDISHOWER-T/-TS/-TT shower tray applications. KERDI-DRAIN features a fully adjustable grate and accommodates a wide range of tile thicknesses: 1/4" (6 mm) to 1-1/4" (32 mm). KERDI-DRAIN is listed by UPC®, CSA, and ICC-ES (Report No. PMG-1204).
KERDI & KERDI-DS NEW Size 6' 7" (2 m ) wide ! is a pliable sheet-applied polyethylene waterproofing membrane and vapor retarder that guarantees uniform thickness. It is covered with an anchoring fleece on both sides to anchor the membrane in thin-set mortar and is suitable for waterproofing in conjunction with tiled surfaces on walls and floors. KERDI is 8-mil thick and has a vapor permeance of 0.90 perms.
KERDI-SHOWER-LT/-LTS are polystyrene sloped trays with integrated KERDI waterproofing for constructing mortar-free shower bases in conjunction with the KERDI-LINE linear drain.
Shower Shelves SHELF is a brushed stainless steel shelf designed for tiled walls. SHELF is available in the Floral and Curve STYLE designs.
Shower Profiles SHOWERPROFILE-R is a two-part wall transition profile made of brushed stainless steel for covering the exposed wall area where the floor slopes down to a perimeter linear drain. A fleece fabric is laminated on the reverse of the profile for bonding with the tile adhesive. Notes: • Can be seamlessly adjusted to any height between 29/32" (23 mm) and 1-25/32" (45 mm), available in two versions • The profile is available in lengths of 39" (1 m) and 55" (1.
SHOWERPROFILE-S is a two-part profile with a tapered edge, designed to cover adjoining tile edges that become exposed as the shower floor slopes to accommodate drainage to the KERDI-LINE. The tapered profile features a visible surface of brushed stainless steel and a fleece fabric on the reverse for bonding with the tile adhesive.
KERDI-BOARD Whether you work with mosaics or large-format tiles, an absolutely flat substrate with straight and precisely aligned inside and outside corners is essential for creating a perfect tile covering, which tile installers can now achieve on their own using Schluter®-KERDI-BOARD. KERDI-BOARD gives tile setters more control over their projects by providing them with the means to simply and easily create ideal substrates for tile.
KERDI-BOARD is a multifunctional tile substrate and building panel, which can also be used for creating bonded waterproofing assemblies with tile coverings. It consists of an extruded polystyrene foam panel, with a special reinforcement material on both sides and fleece webbing for effective anchoring in thin-set mortar. Notes: • Available in 8 thicknesses: - 3/16" (5 mm) - 3/4" (19 mm) - 3/8" (9 mm) - 1" (25 mm) - 1/2" (12.
Uncoupling Membranes Today’s construction methods, which include the use of lightweight materials, have made the installation of hard surface coverings particularly challenging. Because of the differences in material properties, the substrate and the tile layer expand and contract at different rates, creating stresses in the assembly that can ultimately result in damage to the finished tile surface.
Sound Control Schluter®-DITRA-HEAT-DUO is an uncoupling and waterproofing membrane with an integrated bonding fleece that provides sound control. Optionally, the system can be customized with floor heating cables to create a warm, luxurious tile floor. This versatility makes the system an ideal solution for ceramic and stone tile floor installations in many applications, such as multi-story residential construction, hotel guest rooms, condominiums, and many more.
Electric Floor Warming with Uncoupling Schluter®-DITRA-HEAT is the only electric floor warming system that directly incorporates uncoupling technology to ensure that floors aren’t susceptible to cracked tiles and grout. Cables can be placed wherever heat is desired for customized heating zones, and no leveling compounds are required.
DITRA-HEAT is a polypropylene membrane with a cut-back stud structure and an anchoring fleece laminated to the underside. The membrane is designed to secure the DITRA-HEAT-E-HK electric floor heating cables in place, and provide uncoupling, waterproofing, vapor management, and load support to ensure a long lasting installation. Notes: • DITRA-HEAT is 1/4" (5.
Modular Screed for Radiant Heated Floors Schluter®-BEKOTEC is a modular screed system that produces permanent flooring assemblies that are free from internal stresses. The BEKOTEC system is based on a studded polystyrene screed panel. The studs confine curing stresses to small modules, which eliminates curling and allows the installation of continuous screed surfaces without any wire reinforcement or control joints.
Schluter®-Systems Commercial Program • Dedicated commercial support by phone 800-267-0817 and email CommercialSupport@schluter.
