Instruction manual

Fig. 21 Complete label installation for peel-off mode

3.6 Cutter Module Installation (Option)

1. Pull the top cover open levers to open the top cover.

2. Remove the front panel from the lower cover.

Fig. 22 Pull the lever to open the cover

3. Open the top cover and hold it and push down and push backward the top

cover support then push backward the top cover.

4. Use a screwdriver to screw off 6 screws on the lower inner cover.

Lower Cover

Screws

Top Cover

Screws

Top Cover Support

Flute

Lower Cove

Lower Inner Cove

Front Panel