User guide

FRED easyport TRAINER
User guide
Page 29
7 Implementation
• Remove the self-adhesive disks (17) from the training electrodes.
• Stick the blue ends (16) of the connecting cable on the electrodes.
• Begin the training
Note:
Use of the remote control:
• The transmitter of the remote control (12) must be directed in direction of the receiver (9) on
FRED easyport TRAINER.
• No object or nobody must be between the remote control and the receiver.
• The angle of transmission between the infra-red beam and the transmitter or the receiver
should not exceed 45°.
8 To switch the device off
Press longer than 3 sec on the green On/Off button (1) to switch the device off.