Tus neeg siv phau ntawv

1 Turn it on. The front LED will light up,
and the relay will click in after about 10
seconds. Then you’ll have music!
2 Control volume with your headphone
amp or preamp. You need a source with
a volume control. Don’t turn it up until it
distorts, or until your ears bleed.
PROTECTION
If your Rekkr clicks and mutes, clicks and
mutes, over and over, it is protecting itself
from over-current or over-temperature
situations.
Protection will happen when your speaker
cables are shorted or if there is a fault
in your speakers. Check your cables and
OPERATION
6
speakers for shorts, and try
different speakers.
You may also encounter protec-
tion when playing Rekkr loudly
for some time, or when using
low-impedance, low-eciency
speakers. Remember, Rekkr
is a relatively low-powered
amp, designed for desktop and
neareld use.