Specifications

Page -5-
ASSEMBLY INSTRUCTIONS
Figure 1
Components are packed in two cartons. Following is
listing of packaged components:
BOX 1 OF 2
Burner and Control Assembly 1
Base w/wheel kit ass'y 1
Legs 3
Pole Support 1
LP Cylinder Cover 1
Ballast Weight 1
Hardware Bag 1
Battery (for SPC-55PHS only) 1
Owners Manual 1
BOX 2 OF 2
Dome 1
Pole 1
Manifold Ass'y 1
Hardware Bag consists of the following: (Figure 1)
Large Bolts 12
Large Nuts 12
Lock Washers 12
Cap Nuts 3
Small Bolts 3
Manifold Fixing Plate 1
Medium Bolts 1
Long Bolt 1
Large Lock Washer 1
Large Nut 1
Hex Allen Wrench 1
TOOLS REQUIRED:
#2 Philips Head Screwdriver 1
Crescent Wrench 2
Figure 2
Step 1
Attach legs to base using (2) Large Bolts, (2)
Lock Washers and (2) Large Nuts per leg. Finger tight
only. Do not fully tighten until Step 2.
Models
SPC-54PHW SPC-54PHB SPC-54PHT SPC-55PHS
Figure 1
Figure 2