operation manual

www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
Electrical residual risks
Electrical contact
Touching the spark plug may cause an electrical
shock.
Never touch the spark plug while the engine is
running.
Thermal residual risks
burns, chilblains
Touching of the exhaust/ case may cause burns.
allow motor driven machines to cool.
Danger from noise
hearing damage
Prelonged unprotected work with the device may
cause hearing damage.
Always wear ear-muffs .
Danger caused by materials and other substanc-
es
Contact, inhalation
The emissions of the machine may cause damages
to health.
Only use the motor driven machine outdoors.
Fire, explosion
m Fuel is ammable.
During work and refuelling smoking and open
ames are prohibited.
In case of emergency
In case of a possibly occuring accident take the nec-
essary rst aid steps as appropriate and obtain quali-
ed medical aid as quickly as possible.
If you obtain aid please give the following infor-
mations:
1. Where did it happen
2. What happend
3. How many injured
4. Type of injury
5. Who is reporting!
6. Technical data
Generator Digital Inverter
IP class IP23M
Continous power P
nenn
(S1) (230
V) W
1600
Maximum power P
max
(S2 2 min)
(230 V) W
2000
Rated voltage U
nenn
2 x 230 V~
Rated current I
nenn
7 A (230 V)
Frequency F
nenn
50 Hz
Drive engine design 4 stroke 1 cylin-
der air colled
Displacement cm
3
105,6
Maximum power (motor) kW / PS 2,1 / 2,86
Fuel unleaded
Tank capacity l 3,2
type of motor oil 10W30 /
15W40
Consumption at full load l/h 1,07
- before refueling
27. Always close the fuel valve when the machine is
not in operation.
28. Never use the choke lever to stop the engine.
Safety informations service/ mainte-
nance
1. Only original parts may be used for maintenance
and accessories.
2. Replace faulty silencers.
3. Before using, always visually inspect to see that
the tools are not worn or damaged. Replace
worn or damaged elements and bolts. Keep all
nuts, bolts and screws tight to be sure the equip-
ment is in safe working condition.
4. Regularly check for leakage or traces of abrasion
in the fuel system, such as porous pipes, loose or
missing clamps and damage to the tank or tank
cap. Before use all defects must be repaired.
5. Before checking or adjusting the generator or
the motor, the ignition plug and the ignition wire
respectively must be removed to prevent acci-
dental starting.
m WARNING!
Improper maintenance or ignoring/ not rectifying a
problem during the operation may become a source
of danger. Operate your machine only if regular-
ly maintained. Only in this way you can assume that
your device is operating safe, economical and with-
out malfunctions.
Do not clean, maintain, setup or repair the ma-
chine whilst running. Moving parts may cause
serious injuries.
Do not use fuel or other ammable solvents to clean
the equipment.
m WARNING! Vapours of fuels and solvents may ex-
plode.
Reafx the security and safety equipment after repa-
ration and maintenance work.
Keep the machine in safe work condition. Especially
check the fuel system for tightness.
Always remove any dirt from the cooling ns of the
engine.
Residual risks and accident prevention
standards
Neglect of ergonomic principles
Negligent handling of personal protective equip-
ment (PPE)
Negligent handling or ommission of the personal pro-
tective equipment may cause serious injuries.
Wear prescribed personal protection equipment.
Human behaviour, misbehaviour For any work be
fully concentrated.
m Residual risks - Cannot be entirely excluded.
20 / 84
GB
FR
CZ
SK
DE
EE LT LV
GB