operation manual

Troubleshooting guide
Fault Possible cause Remedy
The equipment does not
work
Battery empty Charge battery
Battery is not correctly inserted Remove battery and insert again
Equipment operates
intermittently
Loose connection (external)
Consult a specialist workshop.Loose connection (internal)
ON/OFF switch defective
Saw chain is dry
No oil in the tank Top up with oil
Vent in the oil tank cap is blocked Clean the oil tank cap
Oil outlet is blocked Clear the oil outlet
Chain/guide bar is hot
No oil in the tank Top up with oil
Vent in the oil tank cap is blocked Clean the oil tank cap
Oil outlet is blocked Clear the oil outlet
Chain is blunt Re-sharpen or replace the chain
Chain is overtensioned Check the chain tension
Chainsaw judders, vibrates
or does not saw properly
Chain is undertensioned Adjust the chain tension
Chain is blunt Re-sharpen or replace the chain
Chain is worn Replace the chain
Saw teeth point in the wrong
direction
Re t the chain with the teeth facing in the correct direction
27 І 52