Instructions

www.scheppach.com
30
|
GB
17. Troubleshooting


workshop.
Problem Possible Cause Remedy
Motor stops starting
Overload protection device
disengaged to protect the log
splitter from being damaged

Fails to split logs
 

the machine

 Sharpen cutting edge
Oil leaks 
Log pusher moves

unfamiliar noise or
vibrating a lot



dealer
Oil leaks around the

other points

operating

operating the log splitter
Bleed screw is not tightened before
moving the log splitter
Tighten bleed screw up before moving the log
splitter
Oil drain screw loose 

and/or seal (s) worn

You can obtain information on collection points for


the disposal of waste electrical and electronic equip-
