Instructions
www.scheppach.com
28
|
GB
• -
-
ate the product meets one of the two requirements,
a) or b), named above.
AC motor 230 V/ 50 Hz
Mains voltage 230 Volt / 50 Hz.
The mains connection and the extension cable have to
be three-core cables = P + N + SL. - (1/N/PE).
Extension cables of up to 25 m must have a minimum
cross-section of 1.5 mm².
Mains fuse protection is 16 A maximum.
12. Cleaning
Attention!
-
ing work on the equipment.
-
some soft soap. Do not use cleaning agents or sol-
the equipment. Ensure that no water can get into the
interior of the equipment.
13. Transport
transport.
The machine can be transported on the wheels at an
14. Storage
frost-proof place that is inaccessible to children. The
Store the tool in its original packaging. Cover the elec-
trical tool in order to protect it from dust and moisture.
Store the operating manual with the power tool.
The customer‘s mains connection as well as the ex-
-
ulations.
Damaged electrical connection cable
The insulation on electrical connection cables is often
damaged.
• Passage points, where connection cables are
passed through windows or doors.
• Kinks where the connection cable has been improp-
• Places where the connection cables have been cut
due to being driven over.
• Insulation damage due to being ripped out of the wall
outlet.
• Cracks due to the insulation ageing.
Such damaged electrical connection cables must not
be used and are life-threatening due to the insulation
damage.
Check the electrical connection cables for damage
not hang on the power network during the inspection.
-
cables with the marking H05VV-F.
For single-phase AC motors, we recommend a fuse
rating of 16A (C) or 16A (K) for machines with a high
starting current (starting from 3000 watts)!
DIN EN 61000-3-11
• The product meets the requirements of
•
-
•
points that
a. -
b.
the mains of at least 100 A per phase.