Instructions
www.scheppach.com
GB
|
23
were instructed concerning the operation of the ma-
chine and who are informed about the associated dan-
gers. The minimum age requirement must be complied
with.
woodworking machines must also be observed.
occur due to a failure to observe this manual and the
2. Device description
1. Guard
2.
3.
4. Handle
5. Trunk guide plate
6. Triggering button
7. Ventilation screw
8. Oil drain screw with dipstick
9. Support surface
10. Pressure plate
11. Control lever protection
12. Control lever
13. Motor
14. Transport wheels
15. Pressure limiting screw
16. Foot
3. Scope of delivery
A. Operating manual
B. Enclosed accessories bag (a, b, c, d, e, f)
C. Handle
D. Log splitter
E. Top guard 1
F. Top guard 2
G. Left guard
H.
I.
J. Front guard
K.
L. Protective guard
M.
N. Struts (2x)
O. Strut
1. Introduction
Manufacturer:
Scheppach GmbH
D-89335 Ichenhausen
Dear customer,
and success.
Note:
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
•
technicians,
• Installation and replacement of non-original spare
parts,
•
•
due to the non-compliance of the electric regulations
and VDE regulations 0100, DIN 57113 / VDE0113.
We recommend:
-
structions before installing and commissioning the
device.
The operating instructions are intended to help the us-
er to become familiar with the machine and take ad-
vantage of its application possibilities in accordance
with the recommendations.
The operating instructions contain important infor-
-
repairs, reduce downtimes and how to increase relia-
-
the machine at all times and store it in a plastic cover
to protect it from dirt and moisture.
-