Operation Manual

13
• Utiliseruniquementdesmeulesétantconçuespourune
utilisationablesurlameuleused’établi.Nepasutiliser
demeuledontlavitessederotationmaximaleindiquée
estinférieureàlavitessederotationindiquéepourl’ap-
pareil.
• Il est interdit d'utiliser la machine en présence de
liquidesinammablesoudegaz.
• Protégezvous d’un choc électrique. Evitez le
contact avec des surfaces mises à la terre (p.ex.
tuyaux, radiateurs, cuisinières, réfrigérateurs).
m Utilisation conforme
• LamachineestconformeàladirectivemachinesCEE
en vigueur.
• Les consignes desécurité, ainsiquelesprescriptions
pour le travail et la maintenance, fournies par le fa-
bricantdoiventêtrerespectéesaumêmetitrequeles
dimensionsindiquéesdanslescaractéristiquestechni-
ques.
• Lesconsignescorrespondantespourlapréventiondes
accidents et les autres réglementations généralement
reconnuesdoiventêtrerespectées.
• Seules des personnes compétentes ayant été initiées
• Whensandingalargepieceofmaterial,provideanad-
ditionalsupportattableheight.
• Never sand an unsupported workpiece. Secure the
workpiecewiththetableorthefence.Exceptions are
thesandingofcurvedworkpiecesontheoutsideofthe
sanding disc.
• Alwaysclearthetable,fenceorsandingbeltofscraps
or other objects, before turning the machine on.
• Donotperformanylayoutassemblyorsetupworkon
thetablewhilethesandingmachineisinoperation.
• Switchthemachineoffandpullthepowerplugfromthe
socketwhenttingorremovingaccessories.
• Neverleavetheworking area ofthesanding machine
while the tool is running, or as long as it has not come
to an absolute standstill.
• Do not use the tools in the presence of ammable
liquids or gases.
• Guardagainstelectricshock.Avoidbodycontactwith
earthed or grounded surfaces (e.g. pipes, radiators,
ranges,refrigerators).
m Proper Use
The machine meets the currently valid EU machine direc-
tive.
• Themanufacturer’ssafety,operationandmaintenance
instructions as well as the technical data given in the
calibrations and dimensions must be adhered to.
• Relevantaccidentpreventionregulationsandothergen-
erally recognized safety and technical rules must also
be adhered to.
• Themachinemayonlybeused,maintainedorrepaired
bytrained persons whoarefamiliarwiththemachine
and have been informed about the dangers. Unauthor-