User Manual
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
18
|
GB
f) Ensure that no liquid splashes against the
housing of the power tool. Liquid that has pen-
etrated the power tool can cause damage and
lead to electric shock.
g) Follow the instructions and warnings for the
material to be mixed.
be harmful.
h) If the power tool falls into the material to be
mixed, unplug the power tool immediately
and have the power tool checked by a quali-
ed repair person. Reaching into the mixing
container with the power tool still plugged in can
lead to electric shock.
i) Do not reach into the mixing container with
your hands or insert any other objects into it
while mixing.
j) Start up and run down the power tool in the
mixing container only.
spin in an uncontrolled manner.
Residual risks
m The machine has been built according to the
requirements. However, individual residual risks can
arise during operation.
•
rotating mixing paddle.
• Hazard due to electrical power with the use of im-
proper electrical connection cables.
•
-
main.
• -
structions“ and „Intended use“ are observed along
with the complete operating instructions.
6. Assembly (g. 2-4)
1) Thread the mixing paddle (1) clockwise into the
2) Drive the assembled mixing paddle onto the drive
DANGER!
Use only a mixing paddle that is designed and
suitable for the material to be mixed. A wrong
mixing paddle may put strain on the power tool
which may damage the tool and lead to acci-
dents!
-
d) Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to oper-
ate the power tool. Power tools are dangerous in
the hands of untrained users.
e) Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may aect the power tool’s operation. If
damaged, have the power tool repaired before
use. -
tained power tools.
f) Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the power
could result in a hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease.
handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpect-
ed situations.
5. Service
a) Have your power tool serviced by a qualied
repair person using only identical replace-
ment parts.
power tool is maintained.
m ATTENTION!
during operation. -
sive medical implants under certain conditions. In or-
we recommend that persons with medical implants
the medical implant prior to operating the machine.
Mixer safety instructions
a) Always hold the power tool with both hands
on the intended handles. Loss of control can
b) Ensure sucient ventilation when mixing
ammable materials to avoid a hazardous at-
mosphere.
c) Do not mix food. Power tools and their accesso-
ries are not designed for processing food.
d) Keep the cord away from the working area.
e) Ensure that the mixing container is placed in
a rm and secure position. A container that is