User Manual

www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
23

transport.
Storage


-
structions before storing the device!
Storing the auger

be prepared ahead of time. Unless the storage in-
structions are followed, fuel remaining in the carbu-
retor will evaporate, leaving gum-like deposits. This
󰀩-
pairs.
        

Start the engine and let it run until the engine stops
in order to remove the fuel from the carburettor.

Remove the spark plug.
-
      
times to coat internal components. Replace spark
plug.
-
tential sources of ignition, such as furnaces, hot

Recommissioning the auger
Remove spark plug.
        
combustion chamber.
Clean the spark plug and check that the electrode
gap is correct.
Prepare unit for operation.

11. Disposal and recycling
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
-

of material, such as metal and plastic. Defective com-
ponents must be disposed of as special waste. Ask

NEVER touch the hot motor.




Check the insulator. In case of damage such as

Clean the spark plug electrodes with a wire brush.

mm.
         
spark plug spanner.




replacement.

         
overheating.
Tightening it too much can damage the thread in

The manufacturer is not liable for damage resulting

Replacing the fuel lter g. 8



to the carburetor.
 

at one end to form a hook.
Service information
Please note that the following parts of this product
-
lowing parts are therefore also required for use as
consumables.
Wear parts*: spark plug, drill

10. Storage/Transport
Transport
Leave the motor to cool down before transporting the
machine or storing it indoors in order to prevent burn-

 󰀨       
changing locations during work.
        

When transporting the auger in a vehicle, it must be
