User Manual
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
22
|
5) Service
a) Have your power tool serviced by a qualied
repair person using only identical replace-
ment parts.
Warning! -
-
Additional safety rules for the belt and disc
sanding machine
-
-
•
•
-
•
•
• -
-
•
-
• -
•
•
•
• -
•
• -
-
-
•
-
•
g) If devices are provided for the connection of
dust extraction and collection facilities, en-
sure these are connected and properly used.
h) Do not let familiarity gained from frequent use
of power tools allow you to become compla-
cent and ignore power tool safety principles.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.
b) Do not use the power tool if the switch does
not turn it on and o. -
c) Disconnect the plug from the power source
and/or remove the battery pack, if detach-
able, from the power tool before making any
adjustments, changing parts of insert tools,
or storing power tools.
d) Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to oper-
ate the power tool.
e) Maintain power tools and insert tools. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may aect the power tool’s operation. If
damaged, have the power tool repaired before
use. -
f) Keep cutting tools sharp and clean.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease.
-