User Manual
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
|
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators.
c) Do not expose power tools to rain or wet con-
ditions.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the pow-
er tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. -
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or medi-
cation.
b) Use personal protective equipment. Always
wear eye protection.
-
c) Prevent unintentional starting. Ensure the
switch is in the o-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.
d) Remove any adjusting key or wrench before
turning the power tool on.
e) Do not overreach. Keep proper footing and
balance at all times.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.
4. Intended use
• -
• -
• -
-
•
•
-
-
-
-
5. General safety instructions for
power tools
m WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool.
Save all warnings and instructions for future ref-
erence.
-
1) Work area safety
a) Keep work area clean and well lit.
b) Do not operate power tools in explosive at-
mospheres, such as in the presence of am-
mable liquids, gases or dust. -
c) Keep children and bystanders away while op-
erating a power tool.