User Manual
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
|
23
19
-
are tired.
20 Check damaged parts
- -
- Check for alignment of moving parts, binding
of moving parts, breakage of parts, mounting
operation.
- A guard or other part that is damaged should
-
ized service centre unless otherwise indicat-
ed in this instruction manual.
- -
thorized service centre.
- Do not use the tool if the switch does not turn
21 WARNING!
- -
er than one recommended in this instruction
22
- This electric tool complies with the relevant
-
ble danger to the user.
-
-
-
tive or passive medical implants under certain condi-
injuries, we recommend that persons with medical
-
facturer of the medical implant prior to operating the
electric tool.
Special safety instructions
•
•
•
• -
use lateral pressure equipment and springloaded
8
-
can be caught in moving parts.
- Non-skid footwear is recommended when
working outdoors.
-
hair.
9
-
-
create dust.
10
- lf the tool is provided for the connection of
-
11 Do not abuse the cord
-
sharp edges.
12 Secure work
-
13 Do not overreach
- Keep proper footing and balance at all times.
14
- Keep cutting tools sharp and clean for better
and safer performance.
- -
ing accessories.
-
- -
place if damaged.
-
grease.
15 Disconnect tools
-
changing accessories such as blades, bits
and cutters, disconnect tools from the power
-
and make sure that the planer shaft runs free-
again with reduced feed force.
16
-
and adjusting wrenches are removed from the
tool before turning it on.
17 Avoid unintentional starting
- -
ging in.
18
- -
tension cords intended for outdoor use and
so marked.